EIFS

StoTherm ci® Wall Systems

Integrated Wall Systems that deliver the best in performance, sustainability and design flexibility.

StoTherm ci® Systems integrate the following key elements – continuous insulation (ci), air/moisture barrier, drainage and a variety of textured finish options to create a superior, sustainable wall cladding. This high-performing, eye-catching system saves energy and stays attractive for years. StoTherm ci® improves indoor comfort and air quality while maintaining maximum curb appeal and lowering overall life-cycle costs.

Our Featured Systems

StoTherm ci® Mineral

Ideal where set-back and occupancy requirements necessitate noncombustible insulation.

Stone Wool-Based High-Performance Exterior Wall Cladding System that integrates a seamless Air and Moisture Barrier with Continuous Insulation (ci) and advanced drainage capabilities. Thanks to its mineral fiber insulation boards and mineral base coats, the system provides a high-performance basis for weather-resistant coating systems with a wide range of design options.

FEATURES

Utilizes noncombustible stone wool slab or lamella insulation.

Building Code Compliance: suitable for noncombustible construction and all occupancy and set-back conditions defined in the NBC – 2010, 2015

Use with a variety of Sto premium Standard & Specialty Finishes.

Explore our vast catalog of available colours. Visit StoColor 

DOWNLOADS

Brochure
Design Guide
Install Guide
Sto Thermo Dowel Product Bulletin
System Bulletin
SPEC CA 5600M - DOC
SPEC CA 5600M - PDF

Click here for more information on this System

StoTherm ci®

Superior energy savings, design freedom and versatility.

StoTherm ci® is a high-performance, exterior-wall cladding system that integrates a seamless air and moisture barrier with continuous insulation (ci) and advanced drainage capabilities. The result: excellent protection against moisture intrusion, as well as substantial energy savings thanks to a thermally efficient building envelope that enhances interior climate control and comfort.

StoTherm ci® System works in any climate and is in full compliance with today’s energy and building codes. And because what covers the outside is just as important as the advanced elements inside, StoTherm ci® also provides a wide range of protective and decorative finish options to distinguish your project.

FEATURES

Utilizes EPS ProD or Flat Sheet Insulation

Building Code Compliance: CCMC 12416-R & CAN/ULC S716

Fire Protection Compliance: CAN/ULC S134 & CAN/ULC S101

EPS ProD meets the requirements of Pro-Demnity in Ontario.

Use with a variety of Sto premium Standard & Specialty Finishes.

Explore our vast catalog of available colours. Visit StoColor 

DOWNLOADS

Brochure
System Bulletin
SPEC CA 5400E - DOC
SPEC CA 5400E - PDF

Click here for more information on this System

StoTherm ci® Options and Accessories

  • Sto IMPACT
  • Sto-Ecoshapes
  • Sto Turbostick
  • Corner Bead
  • Drip Edge Profile

Sto IMPACT

Sto IMPACT is a fortification layer that improves the impact resistance of the cladding assembly from both blunt impact and from repetitive and concentrated impacts (e.g., bird strikes) that can cause serious damage to standard cladding systems. Use it in StoTherm ci Systems or as fortification layer over existing EIFS.

DOWNLOADS

System Bulletin
Specification
Product Bulletin
Installation Guide
Brochure

Sto-Ecoshapes

Sto-Ecoshapes produce the look of brick, stone, tile or custom designs in a lightweight, durable, and easy-to-install veneer that keeps the wall thin and lightweight relative to traditional thick masonry or stone veneers.

DOWNLOADS

System Bulletin
Specification

Sto Turbostick™

Sto TurboStick® is a ready-to-use, single component adhesive for installing Sto insulation boards in StoTherm exterior wall claddings, including StoTherm ci XPS. It is also used to attach continuous insulation in StoEnergy Guard® applications. Compared to cementitious adhesives, Sto TurboStick delivers unparalleled convenience and speed.

Available in Two Convenient Sizes
Sto TurboStick is available in both a cylinder and a mini applicator so you can choose the size that best fits your needs.

DOWNLOADS

Brochure
TurboStick™ Mini Product Bulletin

Sto Mesh Corner Bead Standard

Sto Mesh Corner Bead Standard provides a solution to create true and straight corners which are resistant to chipping and cracking in StoTherm ci® wall systems.

The Sto accessory is made of an angled strip of mesh (90° angle) reinforced with a plastic rail, providing a cost-effective and easy-to-apply alternative to the process of wrapping building corners with mesh reinforcement layers.

Sto Mesh Corner Bead Standard is compatible with all Sto basecoat products and provides strength and protection against everyday knocks, enhancing the long-term durability of the façade.

DOWNLOADS

Brochure
Product Bulletin

Sto Drip Edge Profile

Sto Drip Edge Profile is a PVC accessory with integral reinforcing mesh that creates a drip edge and plaster return in StoTherm ci® systems. Its intent is to control the direction of dripping water and help protect the building enclosure from moisture intrusion in vulnerable areas such as fascia returns, balcony undersides and other projecting building elements.

Sto Drip Edge Profile is easy to apply, eliminating labor and costs associated with cutting of drip reveals in foam insulation. The accessory also provides additional crack resistance with its integral mesh reinforcement and helps achieve straighter, cleaner lines at plaster returns.

DOWNLOADS

Brochure
Product Bulletin
VISIT

More Information about our products and systems
View our Documentation Centre.

Your compare list

Compare
REMOVE ALL
COMPARE
0
Need Help ?


NEED HELP

(416) 855-0460

 EMAIL US

TECHNICAL HELP DESK


Operating Hours:
Monday-Friday | 8:00 am – 5:00 pm (EST)


VISIT US

Sto Canada Ltd.
Sales Centre Toronto
1821 Albion Road
Unit 1-2
Etobicoke, ON
M9W 5W8
Phone: (416) 855-0460